The TT Flat Return Tracker amploys a unique and highly effective tracking action, which is non-damaging to the belt and kicks-in immediately if the belt begins to drift off centre.                                    Because it does not rely on contact with the belt edge in order to guide the belt, belt edge damage, which occurs frequently with other tracking systems, is avoided.                                                    

The TT Flat Return Tracker has special tapers (similar to a crown pulley) on the outer edges of the tracker, which cause the drum of the TT roll to pivot an internal, vertical pivot axis. The internal central pivot is perpendicular to the belt and this results in the tracking action always being on the same horizontal plane as the belt. For this reason the TT Flat Return Tracker equally well with reversible and shuttle conveyors.

The bearings are mounted in the bearing housings in both ends of the drum, to provide support for the roller drum over its full length. This ensures concentric vibration-free rotation.

The drum of the TT Tacker is rubberised in natural rubber, ensuring excellent contact and traction between the surfaces of the belt and tracker.

The bearing  housing, including front and back seal, ensuring effective sealing in adverse conditions.